Recycling

  • 20 March 2024

    Italian-Indian collaboration for the recycling of PET bottles

    Ganesha Ecopet, a division of the largest Indian PET recycler, Ganesha Group, entrusted Sorema, the division of Previero Srl specialized in the construction of plastic recycling plants, with the realization of a PET bottle-to-bottle recycling plant in India. It is a pioneering project, the first of its kind in the...
  • 13 March 2024

    Three Amut plants for recycling in Latin America

    Amut recently installed the first of three post-consumer PET bottle recycling lines at a food and beverage company's plant in Lima, Peru. The line has a capacity of 6,000 kg per hour and is designed to recover rPET for the production of new bottles. The second and third lines, both 3,000 kg per hour, will be built at...
  • 21 February 2024

    After Myanmar, Sorema's recycling also in Vietnam

    The post-consumer PET bottle washing and recycling plant supplied by Sorema (the recycling systems division of Previero) running at Commercial Plastics (CPC) in Yangon, Myanmar, achieved the expected quality and quantity parameters, and will provide the basis for a second plant destined for...
  • 10 January 2024

    Filtration and compounding in a single step

    For recycling of post-consumer recyclate (PCR) or any highly contaminated polymer, Coperion has developed the innovative ZSK FilCo filtration compounder that allows filtration and compounding in a single production step. With the new ZSK FilCo system, waste plastic is fed into a ZSK twin screw extruder, where it is melted, homogenized and…
  • 20 December 2023

    Major order for Amut from A2A

    A leading company operating in the field of integrated recycling process solutions, Amut was recently assigned a major order from A2A, a big multi-utility Italian group and a leader in the field of energy and the environment. Recognising the value of the innovative technological solutions offered by...
  • 29 November 2023

    Coperion Recycling Innovation Center is up and running

    Coperion has successfully launched operation of its new Recycling Innovation Center. In this high-tech test centre for plastics recycling applications, every recycling process step - from material handling and feeding to extrusion, compounding, pelletizing, material postprocessing and deodorization - can be tested...
  • 11 October 2023

    An October of exhibitions for CMG SL granulators

    CMG Granulators is currently exhibiting the SL Series without screen at MSV International Engineering (Brno, 10-13 October), ALLpacK Indonesia (Jakarta, 11-14 October) and Fakuma (Friedrichshafen, 17-21 October). The SL granulators are designed to produce regrind with a homogeneous shape and...
  • 04 October 2023

    Versatile shredder for post-consumer film materials

    Designed to wash and grind post-consumer film in commercial, post-logistics and agricultural applications, presorted by color and polymer, with more than 80 % stretch film, Sorema lines can reach an output of more than 10,000 tons/year. Merit for these results can be also attributed to the PR 2800 shredder by Previero, a solution that...
  • 12 July 2023

    Previero and Sorema at Plast with restyling and innovation

    At Plast 2023, Previero will present the restyling of its plastics and rubber granulation lines, while its Sorema division will showcase the latest developments in turnkey plants for recycling post-consumer and post-industrial plastic waste. In particular, Sorema will be exhibiting a WCE2500L washing centrifuge designed to...
  • 31 May 2023

    Sorema plant for the bottle-to-bottle in Myanmar

    After carrying out a washing and recycling test on bottles collected by CPC (Commercial Plastics Company), a PET bottle recycler based in Yangon (Myanmar), Sorema, an Italian company that is one of the main international reference points for its recycling plants, has designed a 2,200 kg/h flake production plant to...
  • 31 May 2023

    CMG granulators for extrusion edge trims at Equiplast

    Among the products exhibited by CMG Granulators at Equiplast (Barcelona 30 May-2 June), at the stand of Luiso, the local distributor, the ET2 configuration of the ET series of extrusion scrap solutions is suitable for the in-line recycling of edge trims. CMG granulators for edge trim and film recycling are available...
  • 31 May 2023

    Wintech rotary presses with Bausano twin-screw extruders

    For the injection moulding of plastic waste and scrap, in particular WEEE waste, without any pre-treatment process, the Venetian manufacturer Wintech decided to incorporate the twin-screw extruders from Bausano into its rotary presses. The extruders feature the degassing system, also developed by the Piedmontese manufacturer...
  • 24 May 2023

    CMG at Plastpol with two granulators

    At Plastpol 2023, which is taking place in Kielce (Poland) from 23 to 26 May, CMG Granulators is exhibiting two granulators, a G17-22 and a low-speed SL-2C. The G17 series is designed to achieve a regrind with very small and homogenous size free of dust. Thanks to its small size, the regrind...
  • 09 May 2023

    Evolution of the cutting chamber

    CMG Granulators takes part at PRSE (Plastics Recycling Show Europe) 2023 on 10 and 11 May in Amsterdam, where it introduces a brand-new cutting chamber design for its Evoluzione granulators range. The new rotor configuration allows the rotor blades to cut the plastic feedstock perpendicularly against...
  • 11 April 2023

    CMG at Chinaplas with the Piovan distributor

    CMG Granulators will take part at Chinaplas 2023 (Shenzhen, 17-23 April) together with the Piovan distributor. The company will launch the new G17 range of press-side granulators with high caliber characteristics. The very innovative and unique features of such a new range are...
  • 22 March 2023

    Automatic and self-cleaning filtration at constant pressure

    Per ottenere polimeri di elevata qualità nei processi di riciclo, la filtrazione è una delle fasi più importanti. A tale scopo Break Machinery ha sviluppato il sistema DUO a doppio filtro che permette di ottenere la massima produttività garantendo un’alta qualità del prodotto finito.
  • 22 March 2023

    CMG at Mecspe as exhibitor and speaker

    At Mecspe (BolognaFiere, 29-31 March) the recycling machinery manufacturer, CMG Granulators, will be exhibiting its latest innovations dedicated, in particular, to injection moulding, blow moulding and post-consumer recycling sectors.