Technology

  • 07 November 2018

    Technologies and services 4.0 protagonists for eleven days

    Enormous enthusiasm for this edition of Inside which took place from October 17 to 27 at the Biesse campus in Pesaro (Italy) and offered visitors a wide range of services and technologies of incomparable value. An edition of Inside that took place over the course of ten days and welcomed clients from... 
  • 31 October 2018

    Silk screen technological evolution and high versatility in one line

    The MS1070 silk screen machine by Moss has been successfully tested in recent days by an Italian manufacturer of cosmetic and pharmaceutical articles for the decoration and assembly of dosing syringes. This machine is part of the Moss servo-driven system family, which allow a good setup control of both machine and its devices and make production...
  • 31 October 2018

    Film thickness reduced up to 6 microns

    From December 4 to 6 Colines will held, at its facility in Marano Ticino (Novarea), a three-day open house to show the 3000-mm latest version of the ALLRollEX range for the production of cast stretch film. The ALLRollEX on display is the second line to be delivered to the company Valfilm just...
  • 24 October 2018

    Euromap 84 for extrusion published as release candidate

    The working group Euromap 84 deals with the standardization of OPC UA based interfaces for extrusion. Experts from ten leading European extruders and extrusion lines manufactures are working together with control systems manufacturers and MES suppliers on standardized...
  • 24 October 2018

    Experiencing the full control

    Under the motto “Experience Full Control,” Sepro Group has exhibited at Fakuma 2018 a total of 21 robots, including 8 operating on its own stand and more than a dozen on the stands of injection-moulding machine manufacturers. “At Fakuma, our focus is on control”, explained Jean-Michel Renaudeau, CEO
  • 24 October 2018

    Improving capacity and versatility of the thermoforming process

    The positive sales reports show that ACF series is the right solution demanded by the market nowadays because it satisfies the various exigencies of thermoformers from all over the world. This consolidates ACF as the top-of-the-range model among Amut-Comi thermoforming machines. The Italian manufacturer continues to invest to upgrade ACF...
  • 18 October 2018

    New parts of Euromap 82 published as release candidates

    The development of OPC UA based Euromap interfaces for the crosslinking of plastics and rubber machinery, preparing them for Industry 4.0, is in full swing. With Euromap 77, the first finished specification was published in May 2018. The first draft for...
  • 18 October 2018

    The advent of special machines made in China

    Around a month after the Plast 2018 fair (held at the FieraMilano exhibition centre from  May 29 to June 1), the MacPlas editors met with Davide Bonfadini, sales director of IMG, to take stock of the company's progress in a year - 2017 - that turned out to be very positive both for the Haitian thermoplastic injection moulding machines...
  • 17 October 2018

    Decoration at full speed and without mistakes

    A primary North American group, leader in the manufacturing of excellent cosmetic packaging has recently visited the Italian company Moss to test and accept its MS 1030 screen-printer for PETG skin cream jars.
  • 17 October 2018

    Deleting the build-up of electrostatic charge

    Plastic materials are electrical insulators by their own nature. This feature is usually desired in most applications but it can generate problems when the final product undergoes rubbing stress. In such conditions, the material accumulates electrostatic charges...
  • 17 October 2018

    Douglas M. Hugo is the new president of Negri Bossi North America

    Leading European injection moulding machine manufacturer Negri Bossi announced the appointment of Douglas M. Hugo as president of North American operations beginning October 1, 2018.  Additionally, his responsibilities will include the North American operations of the group’s automation specialist, Sytrama...
  • 17 October 2018

    Single-station for bi-component applications

    An injection moulding machine with a clamping force of 1,600 tons, capable of co-injecting a total shot weight of 20 kg (sandwich structure) has been recently supplied by Presma to an Italian processor. This machine is equipped with an automatic moulding cell and can optimize the production of large items in bicomponent material (solid/foam), that…
  • 17 October 2018

    Moulding more and better

    At the Fakuma 2018 trade show, BMB (booth 4105, hall A4) is exhibiting the eKW18Pi/700 full electric injection moulding machine focusing on speed, precision and consistency, obtained through a combination of precision mechanics and sophisticated electronics.
  • 10 October 2018

    By the end of 2018 three open doors for the "bottle-to-packaging"

    After the dates in July and in September, the open doors at the Amut headquarters in Novara go on to show in function the plant developed together with Erema for recycling flakes coming from 100% post consumer PET bottles and for producing food-approved single-layer sheets. Three are the scheduled appointments by the end of the year...
  • 10 October 2018

    Technology to exploit the growth of the CPP and CPE film market

    One of the more recent success for Colines is the start of the full production of a new Polycast line for the customer KY Phat in Ho Chi Minh City, Vietnam. The line can produce 2800-mm wide 5-layer CPP and CPE film for lamination and metallization, with special formulations developed by KY Phat and Colines R&D department for this purpose...
  • 03 October 2018

    By 2019 six Bandera plants for HDB

    Over the last few years, the heavy duty bags (HDB) industry has been working to reduce film thickness and increase output. Since the beginning, Bandera has faced this new challenge by investigating, with its partners, specific solutions to meet customer need. The triple-flow cooling ring represents one of Bandera’s cutting-edge products for such a…
  • 03 October 2018

    Tailored hot runner systems for demanding technical parts

    At Fakuma 2018, HRSflow will be demonstrating the universal application of its Flexflow technology of servo-electric driven valve gate solutions based on examples of complex, high-quality parts. Produced with the help of advanced hot runner solutions, they will range from technical parts for the automotive industry to an extremely thin-walled…
  • 26 September 2018

    Efficiency 4.0

    At Fakuma 2018 Moretto will be focusing on the concept of “Efficiency 4.0”, essential for the factory of the future and based on machines connected and integrated with each other by a supervision system that guarantees total control of the process. The machines can be remotely managed, they are able to supply and exchange information, to self-…
  • 19 September 2018

    Everything under control

    The Fakuma show will be the opportunity for Sise to present its new range of GC units dedicated to sequential valve gate control, where three new units will be presented. First, the entry-level GC'Timer, will be able to control up to 16 pneumatic or hydraulic valve gates, then the GC'Access, up to 18, and finally the GC'Tech, up to 32 gates...
  • 19 September 2018

    The development of Tandem regeneration lines keeps on

    The first half of 2018 was very positive for Gamma Meccanica, Italian company specialized in the production of lines for the regeneration of plastic materials. The recent events NPE and Plast in which the company took place proposing, in particular, the new GM Tandem range of regeneration lines brought many interesting prospects and confirmed the…